|
Air Trolley/Slitter Assembly - Conversion Kit
Part #:
For Use With: WPM/AGM angle bars, seam gluers, prefolders, pattern perforators, and plow towers.
Features:
– Converted single wheel air trolley assembly.
– Modified OD axle allows for use of a slitter, perforation, or score wheel.
– Slitter/Perf/Score wheel is fixed in place with two snap rings.
Part# TA-250-10A-MOD (axle) and DW-250R-06 (snap ring) allow for the conversion from a single nip wheel assembly to a slitter/perf/score wheel assembly.
|
|
Snap Rings
Part #: DW-250R-06
For Use With: WPM/AGM angle bars, seam gluers, prefolders, pattern perforators, and plow towers.
Features:
– Replacement snap ring for use with modified axle.
– Two snap rings needed per assembly.
|
|
Recoil Tubing - 1/8"
Part #: RT-125
For Use With: Air trolley (single wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement flexible recoil air tubing used for connecting air manifold bar to individual air trolley and slitter assemblies.
– Manufactured from durable polyurethane to meet or exceed OEM specifications.
Compare to: WPM Part# 148ON5300
|
|
Rectangular Mounting Block
Part #: SA-250-01-07R
For Use With: Air trolley (single wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement mounting block.
|
|
Air Trolley Assembly (Single Wheel)
Part #: TA-250-01S
For Use With: WPM/AGM angle bars, seam gluers, prefolders, pattern perforators, and plow towers.
Features:
– Standard single wheel air trolley assembly.
– Complete assembly includes; air cylinder, male elbow swivel, male hex nipple, sleeve valve, rectangular mounting block/hardware and nip wheel.
– Manufactured to meet or exceed OEM specifications.
Compare to: WPM Part# C68287
|
|
Yoke
Part #: TA-250-02Y
For Use With: Air trolley (single wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement yoke.
|
|
Nose Mount
Part #: TA-250-03M
For Use With: Air trolley (single wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement nose mount.
|
|
Clamp Bar
Part #: TA-250-04B
For Use With: Air trolley (single wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement clamp bar.
|
|
Sleeve Valve
Part #: TA-250-06V
For Use With: Air trolley assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement sleeve valve.
|
|
Hex Nipple
Part #: TA-250-07N
For Use With: Air trolley assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement hex nipple.
|
|
Male Elbow Swivel
Part #: TA-250-08E
For Use With: Air trolley assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement male elbow swivel.
|
|
Air Cylinder
Part #: TA-250-09C
For Use With: Air trolley assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement air cylinder.
|
|
Axle
Part #: TA-250-10A
For Use With: Air trolley (single wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement nip wheel mounting axle.
|
|
Modified Axle
Part #: TA-250-10A-MOD
For Use With: WPM/AGM angle bars, seam gluers, prefolders, pattern perforators, and plow towers.
Features:
-Modified axle to covert single nip wheel assembly into a slitter/perf/score wheel assembly.
Part# TA-250-10A-MOD replaces standard axle #TA-250-10A to allow for slitter, perforation, or score wheel use.
|
|
Guard
Part #: TA-250-11G
For Use With: Air trolley/slitter (single wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement two-piece guard.
|
|
Washer (Spacer)
Part #: TA-250-11W
For Use With: Air trolley (single wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement washer (spacer) for nip wheel.
– Two washers needed per single nip wheel assembly.
|
|
Mounting Screws
Part #: TA-91255
For Use With: Air trolley (single wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement mounting button head socket cap screw.
– Mounts nip wheel to yoke and axle.
– Two screws needed per single nip wheel assembly.
|
|
Nip Wheel - White Delrin - 2.50" OD
Part #: TW-250-1-W
For Use With: Air trolley (single wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Standard replacement air trolley wheel.
– 2.50" OD x 1.25" ID x .9375" Wide
– .475" bearing ID
– Manufactured from delrin and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
– Meets or exceeds OEM specifications.
Compare to: WPM Part# A68283-1
|
|
Nip Wheel - Red Polyurethane - 2.50" OD
Part #: TW-250-2-RU
For Use With: Air trolley (single wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Standard replacement air trolley wheel.
– 2.50" OD x 1.25" ID x .9375" Wide
– .475" bearing ID
– Manufactured from red polyurethane and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
– Meets or exceeds OEM specifications.
|
|
Nip Wheel - Blue Urethane - 2.50" OD
Part #: TW-250-4-P
For Use With: Air trolley (single wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Standard replacement air trolley wheel.
– 2.50" OD x 1.25" ID x .9375" Wide
– .475" bearing ID
– Manufactured from blue urethane and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
– Meets or exceeds OEM specifications.
|