|
Air Trolley Assembly
Part #: C-41061
For Use With: Scheffer / Global Web Finishing angle bars, seam gluers, prefolders, pattern perforators, and plow towers.
Features:
– Standard single wheel air trolley assembly.
– 2" round bar holder frame.
– Complete assembly includes; air cylinder, sleeve valve, air regulator and compression fitting.
– Manufactured to meet or exceed OEM specifications.
Compare to: Scheffer Part# C41061
|
|
Air Cylinder
Part #: C-802L
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement air cylinder.
|
|
Compression Fitting
Part #: D-150C
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement compression fitting.
|
|
Holder Frame
Part #: F-8212
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement 2" round bar holder frame.
|
|
Metal Turn Handle
Part #: H-1075
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement metal turn handle.
|
|
Pneumatic Hose Assembly
Part #: H-1552A
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement pneumatic hose assembly.
– Includes brass air hose fittings.
|
|
Piston Linkage
Part #: L-1540
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement air cylinder piston linkage assembly.
– Connects air cylinder to pivot arm.
|
|
Roll Pin
Part #: P-529
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement roll pin.
– Inserts into pivot arm.
|
|
Pivot Pin
Part #: P-5345
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement pivot pin.
– Connects holder frame to pivot arm.
|
|
Snap Ring/Pivot Pin
Part #: P-5399
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement snap ring for pivot pin.
– Two snap rings needed per assembly.
|
|
Pivot Arm
Part #: PA-5271
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement pivot arm.
|
|
Air Regulator
Part #: R-20K
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement air regulator.
|
|
Axle/Nip Wheel
Part #: S-528A
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement nip wheel mounting axle.
– Connects nip wheel to pivot arm.
|
|
Nip Wheel - Rubber Covered
Part #: See Part #1-1897 & 1-5246
For Use With: Scheffer / Global Web Finishing , I-Web and Spec equipment.
Features:
– Replacement air trolley wheel.
– 3.00" OD x 1.102" ID x .750" Wide
– .475" bearing ID
– High-quality, double sealed, 6001RS low friction bearing. – Qty 2
– Covered with clear rubber urethane material.
|
|
Snap Ring/Nip Wheel Axle
Part #: SR-1056
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement snap ring for nip wheel axle.
– Two snap rings needed per assembly.
|
|
Nip Wheel - White Delrin - 3.00" OD
Part #: TW-300W-07
For Use With: Scheffer / Global Web Finishing , I-Web and Spec equipment.
Features:
– Replacement air trolley wheel.
– 3.00" OD x 1.00" ID x .9375" Wide
– .475" bearing ID
– Manufactured from delrin and supplied with high-quality, double sealed, 6001RS low friction bearings -Qty 2
– Meets or exceeds OEM specifications.
|
|
Sleeve Valve
Part #: V-3W125
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement sleeve valve.
|
|
Washer/Nip Wheel Axle
Part #: W-530
For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement washer for nip wheel axle.
– Two washers needed per assembly.
|